Bluetti Eb3a Firmware

Product Discussion
257

Hi there, I have 2 questions

  1. Is there any plan to change that logic to charge directly from the wall instead of using a battery and therefore drop to 99% in UPS mode?
  2. If there is no such plan or it is not possible to implement, maybe it is possible to introduce some functionality like starting charging when the battery drops lower than 90%? for example, if it uses an inverter for internal purposes let it use it until some level of battery. Then coolers will be turned on rarely and not like every 15-30min to charge that 1%
3 Likes
258

Dear Bluetti Support,
Please push also the Firmware Update for my device.
At least ARM has to be v2064.03 or later.
As mentioned by other people this solves some problems with UPS mode.
Serial number: EB3A2303004019772
Thank you!
Alexey

259

Dear Bluetti Support,
Please push also the Firmware Update for my device.
Serial number: EB3А2303008670255
Thank you!

260

Buenas Noches, necesito saber porque mi bluetti Eb3a cuando esta cargando se frisa en los 92% y no sigue sumando el contador pero al desconectar dependiendo del tiempo que lo deje cargando me muestra cualquier porcentaje superior donde se friso la pantalla

261

Sorry for the late reply, the tech team said there are no similar plans for now.

262

@AngeleToR @bluetti_nokiae51fangmailcom @lexuv @osirisssssss
Sorry for the late reply. May I ask if you have contacted the support team to submit the firmware update request and update to the latest version?

263

Please share your SN and the relevant version number. I suggest you upgrade the firmware first, then perform a full charging and discharging cycle to see if the issue improves.

264

Hi, I still haven’t received the latest firmware.

SN EB3A2230002572044

265

Hi there,

Thanks for replying. I’ve tried to contact customer service for the fw update to no avail.

If you could please push the latest FW to my unit it would be great.

SN. EB3A2306003613757
ARM v2053.08
DSP v2052.11

Best regards

Angel

P.S: As soon as I receive the FW upgrade I will try the full cycle advice you gave and let everybody know the results

266

Hi @lexuv @osirisssssss @AngeleToR and @bluetti_nokiae51fangmailcom , Now I have applied to upgrade your system to our IT department. They will push the latest version of DSP to your machine in 12 hours.

268

I needed ARM v2064.03, not DSP

269

Hi @lexuv, please tell us your current ARM version, and then we will push the new one soon.

270

Hi. The current one is 2053.08

271

@BLUETTI_CARE i buy europe verion of EB3A
When i,m starting fridge from battery its run ok. 3 seconds at 545w and after that fridger use 105w, but when im trying use it at ups mode, i have momentaly overload at 505w. Turbo mode enable.
serial
EB3A2253001569827
Arm(not awaliable update): v.2053.08
Dsp(not awaliable update): v.2052.11

272

I still don’t see any updates.

273

Hi @lexuv and @zaznetkherson , Now I have applied to upgrade your system to our IT department. They will push the new firmware to your machine in 24 hours.

274

Hi there,

Still no software update for me in the app, could you please check if everything is OK???

Regards

Angel

275

Dear Bluetti Support,
Please push also the Firmware Update for my device.
Arm v.2057.11 / Dsp v.2056.10 / SN EB3A2221002464269
North American version
Thank you!

276

It’s no update yet.

Yout sustem is updated, with bo new updates

277

@BLUETTI technical department not send an update yet