Hello, @BLUETTI_CARE, please send me an update, I have the same problem.
S/N: AC180P2349001166914
ARM: v2089.02
DSP: v2088.02
BMS: 1039.01
Hello, I have the same issue. Could you please send me a new firmware with the fix? Thank you
SN: AC180P2344004360004
ARM: v2089.02
DSP: v2088.02
BMS v1039.01
Hello @BLUETTI_CARE . My ac180p does not switch to battery, but turns off when there is no current in the power grid. Eco mode - OFF.
Please send me a new version of the software
SN - AC180P2344004356897
ARM - v2089.02
DSP - v2088.02
BMS - v1039.01
Thank you.
Hey, @BLUETTI_CARE I’ve got the same problem while electricity turns off - my bluetti goes off too.
SN AC180P2344004128723
Version:
ARM v2089,02
DSP v2088,02
BMS v1039,01
Hello @BLUETTI_CARE . My ac180p does not switch to battery, but turns off when there is no current in the power grid. Eco mode - OFF.
Please send a new version of the software
SN - AC180P2344004356897
ARM - 2089.02
DSP - 2088.02
BMS - 1039.01
Thank you.
Hi!
I don’t have issues with the fans working to dissipate heat. But it is an issue if the fans turn on the high speed and never turn off or slow down when loading a small device until I turn on a “bigger device”.
The fans slow down instantly to the minimum speed like it’s a charge in the silent mode only when I get over ~100W+ of load. Cells cannot overheat from such small loads in a room without direct sunlight.
Also, I think this “bug” triggers when DC ports are turned off. I had DC and AC ports turned on while powering small devices 2 nights in a row and the station didn’t wake me up. But I’m not 100% sure and don’t quote me on that.
1 Like
I have the same problem. Please provide me with apdated firmware
AC180P2344004191931
ARM v2089.02
DSP v2088.02
BMS v1039.01
Hello @BLUETTI_CARE Please send a firmware update to my device.
Model: AC180P
AC180P2344000369924
ARM v2125.01
DSP v2126.02
BMS v1048.03
Hello @BLUETTI_CARE Please send an update to my device.
Serial: AC180P2352000662537
ARM v2089.03
DSP v2088.02
BMS v1039.01
Hello @BLUETTI_CARE. Same problem here. Can you please push new firmware version to me?
AC180P2344000607443
ARM: v2089.02
DSP: v2088.02
BMS: v1039.01
Здравствуйте@BLUETTI_CARE! Пришлите пожалуйста новую прошивку ещё на одно моё устройство!
AC180P2342000869201
ARM v2089.02
DSP v2088.02
BMS v1039.01
Спасибо!
I have the same problem as VSM mentioned.
If AC is turned on and I’m using some device that consumes 50-150 watts of power, fans are working but in silent mode.
But if for example I will have only DC turned on, then will plug usb-c charging cable to the usb-c charging port in order to charge my macbook station will consume around 80 watts. Then in 15-20 minutes fans are starting working on maximum. Reproduced it few times already. So the problem is connected with DC.
1 Like
That is interesting and we’re getting somewhere. I never used USB-C so I can’t confirm, but my theory is: fans go crazy after a while if either DC or AC is loaded <100 watts.
1 Like
Hello @BLUETTI_CARE !
Please send a firmware update to my device. I have the same problem with my AC180P (turns off randomly). Thank you!
Model: AC180P
SN AC180P2349001958248
ARM: v2089.02
DSP: v2088.02
BMS: 1039.01
Dear @BLUETTI_CARE
I’m having the same issue with my AC180P. Kindly asking for a new DSP version.
SN: AC180P2332001731422
ARM: v2089.02
DSP: v2088.02
BMS: v1039.01
Thank you in advance.
Hello @BLUETTI_CARE
I’m going to use my BLUETTI as UPS. Please send a firmware update to my device. Thank you!
Model: AC180P
SN: AC180P2349002203124
ARM: v2089,02
DSP: v2088,02
BMS: v1039,01
@BLUETTI_CARE
Hello, I have the same issue. Could you please send me a new firmware with the fix? Thank you
SN: AC180P2342000499686
ARM: v2089.02
DSP: v2088.02
BMS v1039.01
Hi, could you push new firmware to me, please? Thanks!
AC180P2344003115908
ARM: v2089.02
DSP: v2088.02
BMS: v1039.01
AC180P2349001909688
ARM v2089,02
DSP v2088,02
BMS v1039,01
The ac180p turns off when operating in UPS mode, an update is needed. Thank you.
AC180P2342000274156
ARM version v2089.02
DSP version v2088.02
BMS version v1039.01