Any news on my question, @BLUETTI_CARE
Having same issue.
New Bluetti AC180P (Serial number is 2342000664076, arm 2089,02, dsp 2088,02).
ECO modes are disabled for both DC and AC, device is working with fridge (80 watts of almost constant AC output with rare “launching spikes”), standart charging mode — and itі just turns off in 3-4 hours without any errors or messages on device or in app.
Is there any solutions?
@oleksandr.kalukov I’m sorry I haven’t got another update. Please don’t worry. I am following up with your case.
1 Like
@oleksandr.kalukov Please update the DSP firmware to v2088.04 to test. Looking forward to your update.
Thank you @BLUETTI_CARE I monitored the behavior a little bit and it repeated. So, I updated the DSP firmware to 2088.04. Keeping my eye on it and I will get back to you once I have any news.
Hello @BLUETTI_CARE after updating to DSP firmware to v2088.04 my device is working as expected, no shutdowns for 4 days so far.
1 Like
Hi!
Having the same issue with the automatic shutdown (randomly) of my Bluetii AC180P (otherwise a solid piece of engineering). Please, provide me with the newest firmware (2088,04) upgrade to test it.
Many thanks
P.S. AC 180P2342000542085
ARM version v.2089,02
DSP version v. 2088,02
BMS version v. 1039,01
Dear @BLUETTI_CARE,
Please update software, my device is:
AC180P2349000781047
ARM V2089.02
DSP V2088.02
BMS V1039.01
After about 2 hours in UPS mode, with connected fridge, the station turned off. The fridge was using about 80 Wt, before power off consumption was 0 Wt.
ECO and Auto sleep are turned off.
Hi @BLUETTI_CARE ,
I have the same issue. AC180P randomly powers off with 70-110W output. Didn’t see any error codes. It happens 2-3 times in a day.
Bought the station a few days ago.
And also, is it ok if the station discharges in UPS mode? Using it with a computer(around 100W) and I see it discharges to 99% then charges to 100%. The Battery Status = Discharge instead of Standby when it’s 100% in Bluetti mobile Application.
AC180P
SN: 2341000808144
ARM ver: 2089.02
DSP ver: 2088.02
BMS: 1039.01
1 Like
Please send the new firmware to me too, because… I also encountered the problem of turning off the station under a load of 200 W
S/N: AC180P2349000575473
ARM v2089.02
DSP v2088.02
BMS v1039.01
Hello, i have same problem with UPS, the station turns off after a power outage.
Can i have latest softwear update?
AC180P2349001446229
ARM: v2089.02
DSP: v2088.02
BMS: v1039.01
Above request will be processed ASAP.
2 Likes
@BLUETTI_CARE,
Updated DSP to V2088.04, will test, thank you for the quick response!
UPD: about 3 hours passed since the soft update, no shotdowns are detected.
Hey, i have same problem with UPS, the station turns off after a power outage.
Can i have latest softwear update?
AC180P2349000491882
ARM: v2089.02
DSP: v2088.02
BMS: v1039.01
Hi, @BLUETTI_CARE,
I once again remind you of my humble request to send me the newest available firmware (2088,04) as the above-described deficiency keeps coming…
Many thanks
P.S. AC 180P2342000542085
ARM version v.2089,02
DSP version v. 2088,02
BMS version v. 1039,01
Hello, @BLUETTI_CARE
I have same problem with UPS, the station turns off after a power outage.
Can I have the latest software update?
AC180P2349001193852
ARM: v2089.02
DSP: v2088.02
BMS: v1039.01
You should have received the new firmware, please check again.
You should have received the new firmware, please check again.