Hi @Pletenets, We realize that you are particularly concerned about the fan issue, but we do not have firmware specifically for the fan. Therefore, we haven’t pushed any firmware yet.
Please note that the new firmware can only address the functionality of saving output settings. Are you sure you still need it?
Once confirmed, we will push it to you immediately.
Hi @BLUETTI_CARE ,
I have tried out the update. I let the AC70 run til it shut off by powering my AC fridge freezer. Then I plugged the AC70 into the mains to recharge. At 5% it turned it’s AC back on automatically and began to power the fridge. It works just as it should. Thank you very much 
1 Like
Hi @Tezzabee, Thank you for the update! We’re glad to hear this great news!
We’ve shared it with the R&D department, and they are also very pleased!
1 Like
Hello, @BLUETTI_CARE !
I noticed that in the Bluetti app for my AC180P stations in Advanced Settings there is now a choice of the item
System Switch Recovery (default - Disabled).
As I understand it, this setting allows you to restore the state of the AC/DC output after rebooting the station.
This is a great feature, it is very good that it appeared.
But when I try to turn it on, the Bluetti app writes about some Pro Mode and asks to enter a password for this mode.
What is this mode, and where can I get this password?
Hello @BLUETTI_CARE!
So this feature can now be enabled via app? Please allow AC200PL users to have it too (I have no System Switch Recovery in my latest Android app).
Thanks!
Hi @align24, Thank you for your feedback on the new app feature, it is very important to us.
To enter this mode, you need to input the advanced mode password, which is eight 8s.
I hope it does help.
Hi @snmya, Currently, AC200PL users can only achieve this by upgrading the firmware; the app’s accompanying services are not yet complete.
We have forwarded your feedback to the app department. They have a heavy workload recently, so it may take some time to get a response.
1 Like
Yes, everything worked out, thank you!
Hi @align24, Thank you for your feedback, we are delighted to hear that the issue has been resolved.
Your evaluation is very important to us, and we will share this good news with the app department.
Adide from the AC180P, could you please include the AC180? Pretty please?
Я сегодня обновил AC180P,это прекрасно что наконец то появился это пункт в меню,по восстановлению AC,тоже жду обновление для AC200PL.
Заранее благодарю
Hi @Jayar, We’re happy to inform you that we’ve now developed a new firmware for the AC180 that allows it to save both AC and DC output settings.
Please let us know your AC180’s SN code and current firmware version, and we’ll push the update to your unit.
By the way, please note that if you need my assistance, please @BLUETTI_CARE, otherwise, I might not see your message and be able to help you promptly.
Hi @Pletenets, Thank you for the update. We’re glad to hear that the new firmware for the AC180P is working well.
Regarding the AC200PL, we’ve already forwarded your request to the relevant team. We hope they can release the new firmware as soon as possible.
3 Likes
Hi @BLUETTI_CARE Id be keen for this feature!! its one of the cons for the AC180 for me that after the unit has run out of power and the charger 1 recharges some power the AC180 turns on but it doesnt remember DC state to on after it ran out of charge i have to manually remember to turn on the dc again :(
@BLUETTI_CARE Hello, totally agrreing with previous author, but for the AC200PL, any news on that?
Thank you.
Hi @bluetti_rachelgreenlinkwebau, The AC180 now has new firmware available that enables the “remember output Settings” feature.
If you would like this feature, please provide your AC180’s SN code and current firmware version.
Please note that after the update, this feature will be enabled by default and cannot be turned off.
Also, please note that AC output will only activate when the battery’s level more than 5%.
- When grid power is available, the output settings will resume as soon as the battery reaches 5%.
- When grid power is unavailable, the output settings will only resume if the battery reaches 5% and the output has remained off for at least 30 minutes.
Additionally, if your Bluetti app has been updated to version 2.3.10, you’ll need to input the password 88888888 to enable this feature.
1 Like
Hi @snmya, Thank you for your attention to BLUETTI.
We have once again urged the R&D department regarding the new firmware for the AC200PL, but we have not received a response yet.
3 Likes
Very nice feature to have, finally 
Confirmed that its working on AC180P - “When grid power is available, the output settings will resume as soon as the battery reaches 5%”
IoT v9046.01
ARM v2125.04
1 Like
Hi @BLUETTI_CARE ,
I had the system switch recovery added to my AC70.
It works as it should, there is no problem, but I have 2 other Bluettis now that have the recovery feature where it can also be turned on and off via the app, so I don’t need it on the AC70 anymore. When you added it previously you said it could be removed by reverting to the previous update status of the AC70. Please could you do that for me?
Thank you.
Hi @Tezzabee, We have consulted with the technical team regarding this matter and learned that the function can be turned off via the app instead of rolling back the firmware, which is more convenient.
Would you agree to this solution? This approach can avoid potential risks of firmware rollback and save you time. I hope it does help.