Hi! I have the same problem.
Could you please push this new firmware to me?
AC180P2349001458456
ARM 2089.02
DSP 2088.08
BMS 1039.01
Hello. Will I heve this problem? Do I need to update new firmware version? What is the latest?
AC180P235000182927
ARM v2089.03
DSP v2088.02
BMS v1039.01
Could you please also push new firmware to me?
Hi! I have the same problem.
Could you please push this new firmware to me?
AC180P2335001216883
ARM 2089.02
DSP 2088.02
BMS 1039.01
1 Like
I have the same problem. When at 100% battery the station shut downs by itself after some time (ECO is off).
@BLUETTI_CARE Could you please also push this firmware to me?
AC180P2349002053245
ARM 2089.02
DSP 2088.02
BMS 1039.01
1 Like
The above request will be processed ASAP.
So far so good, DSP updated to 2088,04 zero shutdowns for 3 days (all this time it was in UPS mode).
It still doesn’t show loads under 15 watts on display, though, and the cooling system inadequately reacts to these loads.
f.e. if I plug in my internet router and my coffee machine (over 1000 watts total) then turn my coffee machine off and keep the internet router on (less than 15 watts), the fans will keep spinning forever like it’s still over 1000 watts of load until I plug something else in to get more than 15 watts of load (my PC or desktop lamp) and only after that the fans slow down. Maybe it’s the BMS firmware issue, idk.
1 Like
Hi, @BLUETTI_CARE,
I once again remind you of my humble request to send me the newest available firmware (2088,04) as the above-described deficiency keeps coming…
Many thanks
P.S. AC 180P2342000542085
ARM version v.2089,02
DSP version v. 2088,02
BMS version v. 1039,01
Dear ,@BLUETTI_CARE
Thank you so much for your quick response!
Now the newest firmware has been successfully installed. From now on I`ll keep a watchful eye on the performance of the unit.
Please update my power station.
AC180P2352000663884
ARM version v2089,03
DSP version v2088,02
BMS version v1039,01
Hi, @BLUETTI_CARE
I have the same issue. Please push the firmware.
AC180P2335001139375
ARM version v2089,02
DSP version v2088,02
BMS version v1039,01
No shutdowns in 24h on DSP 2088.04. Will report after prolonged tests.
Hi, I no longer disconnect at 100%, but disconnections at 99% appeared. Could you please send me an 04 update?
AC180P2349000709407
ARM - 2089,02
DSP - 2088,03
BMS - 1039,01
I have the same problem: it randomly turns off when the grid disconnects in UPS mode. Please push the new firmware. SN:
AC180P2344000331892
ARM V2125.01
DSP V2126.02
BMS v1048.03
The above request will be processed in 24 hours.
4 Likes
Hello, same issue here. Looking forward to receiving an update!
SN: AC180P2335001641541
ARM: v2089.02
DSP: v2088.02
BMS: 1039.01
Hi, same problem, AC180P turns off in UPS mode (ECO off).
SN - AC180P2349000755939
ARM - 2089.02
DSP - 2088.02
BMS - 1039.01
Could you please send me update?
AC180P2344000318647
ARM - 2125,01
DSP - 2126,02
BMS - 1048,03
Today I also had a similar problem, the station shut down during a power outage, I turned off the ECO mode, but I would still like to receive an update.
AC180P2341000800566
ARM v2089,02
DPS v2088,02
BMS v1039,01
@BLUETTI_CARE
Hello again,
I would like to request a firmware with fix for my another ac180p device, please and thank you
SN: AC180P2335000869887
ARM v2089.02
DSP v2088.02
BMS v1039.01
I have a problem with UPS mode in Bluetti AC180P
s/n 2332001379568
bms v1039,01
arm v2089,02
dsp v2088,02
Could you please send me update?