Hello together, as I want to use the AC inverter only during the night it would be great if the inverter can be programmed according to time or it may also makes sense to switch it on depending on Batterie SOC and PV input.
Hopefully this feature can be added in the next SW release.
Thanks a lot!
The AC200Max itself doesn’t have support for this feature (yet, Bluetti? hint hint).
In the meanwhile you could accompany it with a Raspberry Pi that keeps connected via Bluetooth. With some not-so-difficult Python programming you could achieve your goal. I’m enthusiastic about this setup because I use it to monitor the AC200Max and to bridge it to MQTT to disclose the information (and control) to many available MQTT clients.
I recommended the wonderful Bluetti MQTT on Github by Warhammerkid package! Lots of kudos to @Chromedshark for his splendid open source initiative.
Example https://community.bluettipower.com/t/jump-in-battery-fully-charged/4501/6
Hi @stoal3008 , suggestions received.
We will submit it to the product’s firmware update engineer to see if it can be upgraded.
Thanks again for your sincere analysis and suggestions.
The last report on this was over a year ago. Is there any news on this yet, is BLUETTI planning to realise communication with home automation via MQTT?
Or should all customers who need such an interface really make do with Rasperry Pi or something similar?
@SigiKa Sorry, it has been confirmed that BLUETTI is not able to achieve home automation communication at this time.