| ### NYC resident mike.moll@gmail.com | 7:15 PM (1 minute ago) | ||
|---|---|---|---|
| to sale, service |
|
hi, I was hoping that I could connect the A1 hub to the grid on one
port and then on another port connect my internal electrical service
box using the APEX 300 pairs via the A! hub as a bridge between the
grid and my internal electrical box circuts…with my internal
circuts never running off the grid and always running off the APEX
300s on the A1 hub.
but…I dont see an in from grid power and a seperate out to
intenrnal circuts and I dont see in from the grid and out to internal
electrical circuts for each apex 300.
it seems that there is one connection from the A1 hub to the gird and
its bi drectional so you cant split it to have the a1 hub be a bridge
like wise for the apex 300s.
which means that some type of transfer switch is needed to isolate A1
hub power from the grid…which is not practical if the goal is to
charge the apex 300’s off peak and use them to power my house during
peak hours.
I reviewed your apex 300 and A1 hub documentation and I do not see a
bridge functionality to allow an apex 300 system to charge at night
and power internal circuts during the day with the internal circuts
never actually being on the grid.
please clarify