Hello everyone, help me understand the operation of the Bluetti EP760. After connecting solar panels and firmware to the latest version, it works as shown in the photo.
These 4 photos are the day:
These 4 photos are night:
These 4 photos are night:
Hi @SergeyKO
would it possible for you to change the language to english temporary in the App? So we can actual read what kind of settings are active.
Thanks
Erik
Got a response from support today, thanks Mike. In the coming days, I will try the received recommendations, because the Bluetti EP760 is in another city, after which I will definitely write back. I am attaching the received instructions in Ukrainian.
EP760 APP User Manua Ukraine.pdf (4.9 MB)
@SergeyKO
Thank you for the follow-up reply. Glad to know Mike promptly addressed your concerns. Should you have any further questions regarding EP760 usage, feel free to contact Supervisor Mike via WhatsApp. 
Hello everyone, after testing the EP760 operating modes and with the help of Mike, I will tell you about my experience with the operation and setting up of the EP760 from solar panels. The priority for the customer was the maximum use of solar energy and its accumulation in accordance with the instructions of p. 5.4 “Prioritization of photovoltaic charging”.
In order for the EP760 to work in this mode, the following parameters must be set:
- “Generator+Inverter Power - ON” - in the diagram, the generator is in front of the EP760, and it somehow affects point 2;
- “ Single-phase Grid Max. Input Power - 0”;
- “SOC Setting 70-80%” - It is individual;
I also found that the Bluetti EP760 does not work in “Time of Use” mode when the PV switch is on.
Now the EP760 works according to the customer’s requirements.
Photo of work:
Morning
Day
Evening
