AC200MAX’s 900w solar input maximum being exceeded

Product Discussion Solar Panel
1

Hello: I have a concern about my AC200MAX’s 900w solar input maximum being exceeded.
I have 2 PV350’s and 1 PV200 connected in series to my MAX for a combined total of 900W, but the App shows me from time to time receiving about 2% over the panels rating. What I am a little concerned about is the fact the wattage is over the AC200MAX’s 900watt threshold, not for long, maybe around 10–15 seconds at a time and only during a 10-20 minute time period during peak solar efficiency.

APP over 900w
APP over 900w443×890 50.1 KB

Here is a photo I took of the Bluetti App the other day exceeding the Solar Panel (which I commented on in a past note, and understand that that is certainly
possible). and the AC200MAX’s maximum
My question, is that safe for the MAX?

1 Like
2

@Liberty It is normal. If the sun is particularly good and the conversion rate is high, it is possible to exceed the peak value.

3

In short…it’s not a problem and you need not worry. Totally normal. Your machine will not allow more power that it can use.