I have the same problem: it randomly turns off when the grid disconnects in UPS mode. Please push the new firmware. SN:
AC180P2344003056736
ARM V2089.02
DSP V2088.02
BMS v1039.01
I have the same problem.
“when at 100% battery and losing power from the grid the station shut downs by itself (sometimes).”
AC180P2342000142950
ARM v2089.02
DSP v2088. 02
BMS v1039.01
I have the same problem: it randomly turns off when the grid disconnects in UPS mode. Please push the new firmware. SN:
AC180P2344003056736
ARM V2089.02
DSP V2088.02
BMS v1039.01
У меня та же проблема: он случайно выключается, когда сеть отключается в режиме UPS. Пожалуйста, пришлите новую прошивку. СН:
AC180P2344003056736
АРМ V2089.02
DSP V2088.02
BMS v1039.01
I have received and tested (one day until now) the new DSP v2088.04 firmware - the problem with switching off at 100% SOC and greed off seems to be solved. Tank you!
Hello @BLUETTI_CARE
Have same randomly shut down issues in UPS mode on my AC180P when on 100% power state and after grid power loss.(DC - off / AC - on / power lifting - on / ECO AC/DC - off Grid self-adaptation - on)
Also noticed a fan bug, when they sometimes off and don’t spin, on low power draw (<105W), and after some time push to MAX speed, and never spin down to lower state till i turn off/on the station
Please share new firmware
ACP180P2344000469144
ARM v2125,01
DSP v2126,02
BMS v1048,03
I also had a problem during the operation of the station in UPS mode, please provide firmware update.
S/n ac180p2349000192450
ARM v2089.02
DSP v2088.02
BMS V1039.01
Please update my power station.
AC180P2342000699453
ARM version v2089,03
DSP version v2088,02
BMS version v1039,01
выключается в режиме UPS. Пожалуйста, пришлите новую прошивку.!!! СН:
AC180P2344003056736
АРМ V2089.02
DSP V2088.02
BMS v1039.01
Hi @BLUETTI_CARE, I’ve updated the firmware, but faced with one bug. I’ve changed charging mode from silent to standard, and now I cannot change it to anything else. The other options like eco mode or screen auto sleep are working fine. And for me personally it’s a very big problem, as I charge the station over night. Please, can fix it?
Hi @BLUETTI_CARE. That’s the application bug. I checked the feature on iPad runing 2.3.2 version of the application, and it works. iPhone on 2.3.3 has a bug with charging mode changing, it is not changing it at all.
Please, fix it, it is horrible experience for the product that worse 1k usd.
Good day!
I have 2 Bluetti AC180P stations, one with a load of 120w lasts 9 hours, the other with the same load lasts 3 hours. It seems to me that there may be a problem with the software and its updates. Tell me what to do?
Number:
AC180P2349001699793
I sent the serial number 15 days ago but still haven’t received the update. Could you please send me an update as the problem still exists. Thanks!
I sent the serial number 7 days ago but still haven’t received the update. Could you please send me an update as the problem still exists. Thanks!
Hi, please provide firmware update. I have the same error with shutdown. @BLUETTI_CARE
Ac180p2349001477562
Arm: v2089,02
Dsp: v2088,02
Bms: v1039,01
Thank you, the updated firmware works good
I have the same problem…
when at 100% battery and losing power from the grid the station shut downs by itself (randomly).
ac180p2349001218963
ARM: 2089.02
DSP: 2088.02
BMS: 1039.01
@andrii_dub This issue is with the app, and it has already been fixed. You need to upgrade to the latest APP version. This issue usually only occurs on iOS system.
To maintain consistency of the thread and focus on resolving the AC180P issue, I have forwarded the above SN and version number to the BLUETTI_CARE team. The firmware update is expected to be pushed within 24 hours, and this thread will then be closed.
For any similar feedback in the future, please continue posting in the following thread. Thank you for your understanding and cooperation.