@VSM @design has the latest update solved the fan issue?
I’ve just updated my stations but have not tested them yet since they need to be rested for a while, working 24/7 lately.
Nope, issue is not solved
1 Like
@BLUETTI_CARE Dear team,
I have the same fan issue on both of my AC180P stations as VSM and design have.
Whenever something with low power consumption (say less than 100W) is being powered by the station, after a while, the fans start spinning as if the station was being charged in Turbo mode. Once you add more power consumption (be it 500 or 1000W) fans start spinning normally. I would assume this is a bug rather than a feature. Kindly assist.
Thank you.
1. SN: AC180P2335002001026
ARM: v2089.03
DSP: 2088.04
BMS: 1039.01
2. SN: AC180P2341000252355
ARM: v2089.03
DSP: 2088.04
BMS: 1039.01
By the way, thank you for fixing the issue with the UPS mode with the 2088.04 update! Cheers!
У мене така ж проблема станція вимикалася рандомно після зникнення живлення, або після досягнення заряду батареї 100%
AC180P2335000961690
BMS: v1039.01
Hello, @BLUETTI
I have updated ARM of AC180P to v.03
Possibility of turning display off/on when display timeout is set to Never is a convenient feature.
Thank you.
1 Like
Hey everyone!
I already see in the Forums that this update will get pushed in waves for everyone. So there is no need to write down you Serial Number anymore. Keep an eye of the update page. It should reach you too.
Great weekend you all!
Erik
1 Like
Hi team! Could you please also push new 04 firmware to me? Thanks!
AC180P2352000539091
ARM: 2089.03
DSP: 2088.03
BMS: 1039.01
Hello! New ARM version is available, but the button doesn’t appear.
Could you please push the ARM v2089.03 to my device?
Thank you in advance.
SN: AC180P2344004360004
ARM: v2089.02
DSP: v2088.04
BMS v1039.01
Please, send me a new firmware.
AC180P2352001540791
ARM v2089.03
DSP v2088.02
BMS v1039.01
UPS mode doesn’t work, as soon as the light goes out, the station turns off and needs to be turned on again
Hi, @BLUETTI_CARE!
Please update my power station.
AC180P2344004023990
ARM version v2089.03
DSP version v2088.03
BMS version v1039.01
Hi @Kate, please log into the Bluetti app, can you find the new DSP v2088.03? Please upgrade the firmware to resolve this problem. Please do not load any device when upgrading it.
Hello, could you push new 04 firmware to me? Thanks!
AC180P2342001385966
ARM: 2089.02
DSP: 2088.02
BMS: 1039.01
Hi @BLUETTI_CARE!
I have the same problem with AC180P: it turns off randomly in UPS mode (ECO off). I need upgrade
SN - AC180P2335000967608
ARM - 2089.03
DSP - 2088.03
BMS - 1039.01
I have the same problem: it randomly turns off when the grid disconnects in UPS mode. Please push the new firmware. SN:
AC180P2344000419876
ARM V2125.01
DSP V2126.02
BMS v1048.03
Please, send me a new firmware.
AC180P2352000501130
ARM v2089.03
DSP v2088.02
BMS v1033.01
UPS mode doesn’t work, as soon as the light goes out, the station turns off and needs to be turned on again
What is the latest version of the app? Because the latest version in the playmarket is 2.3.2
Hi, can you send me updates for UPS mode, station AC180P, serial number 2349000960345
Hi, can you send me updates for UPS mode, station AC180P, serial number 2349000960345
ARM 2089.02
DSP 2088.02
BMS 1039.01
Hi @BLUETTI_CARE Same issue here. Could you please push this fw to my device as well?
AC180P2344000456002
ARM 2125,01
DSP 2126,02
BMS 1048,03
Thanks!