Hello @BLUETTI_CARE. Same problem here. Can you please push new firmware version to me?
AC180P2349002461242
ARM: v2089.03
DSP: v2088.02
BMS: v1039.01
1 Like
I have the same problem: it randomly turns off when the grid disconnects in UPS mode. Please push the new firmware. SN:
AC180P2348001071992
ARM V2089.02
DSP V2088.02
BMS v1039.01
Hello, please send the new firmware for my device.
AC180P2335001309730
Arm v2089.02
DSP v2088.02
BMS v1039.01
Thank you!
I don’t think it’s a problem. I have an AC70P and if I have a full 100w going through the DC port, the fans are also loud. Through the AC port the load has to be well over 200w to activate the fan at that RPM.
So it seems to me that this is normal operation, apparently more air is needed to cool the DC ports.
Hello! @BLUETTI_CARE
I have the same problem. could u,please, send me a new firmware to fix it.
AC180P2349002454238
ARM 2089.03
DSP 2088.02
BMS 1039.01
Actually this is the real problem. Cuz when you are charging a notebook (~30-80 w) after 30 minutes the fans turn on at MAX speed and NEVER stop. On the AC port fans are turned on once every half hour in quiet mode.
Topic with this issue: AC180P fan
Hi @BLUETTI_CARE ! Thank you for getting back on this! I would be happy to try out the new firmware but I still haven’t received the one.
Duplicating the S/N just in case: AC180P2349002235901
Still have no updates here :( really need it asap
@BLUETTI_CARE
AC180P2335001073432
ARM - v2089.02
DSP - v2088.02
BMS - v1039.01
Hi @BLUETTI_CARE,
Same issue here. Could you please push this fw to my device as well?
AC180P2332001474436
ARM 2089.02
DSP 2088.02
BMS 1039.01
Hi, @BLUETTI_CARE,
24 hours ago I sent a request for an firmware update, but have not received it yet. Perhaps I wrote it in the wrong place, so I’m duplicating it here.
My Bluetti AC180P works as UPS for fridge.
Serial number is AC180P2349000040459
arm v2089.02
dsp v2088.02
bms v1039.01
My Bluetti AC180P is randomly turns off when the grid disconnects in UPS mode. Please push the new firmware to my Bluetti.
Regards,
Andrii
Hello, could you be so kind to provide me with a new firmware too.
AC180P2341000198851
ARM v2089,02
DSP v2088,02
BMS v1039,01
Thanks in advance.
Hi! Same issue here. Could you please push this fw to my device as well?
AC180P2335001646247
ARM 2089.02
DSP 2088.02
BMS 1039.01
Thanks!
Please send me an update go version 2088.04
AC180P2344000717181
ARM v2089,.02
DSP v2088.02
BMS v1039.01
Hi! @BLUETTI_CARE
I have the same problem. Please, send me a new firmware to fix it.
AC180P2349001576941
ARM 2089.02
DSP 2088.02
BMS 1039.01
Please, help me to fix this issue.
Hi! Same issue here. Could you please push this fw to my device as well?
AC180P2349001761850
ARM 2089.02
DSP 2088.02
BMS 1039.01
Thanks!
Hello!
New Bluetti AC180P works as UPS for fridge (Serial number is 2344004195326, 2344004331017, arm v2089.02, dsp v2088.02).
Today, my Bluetti shutdown after grid disconnected. Charge level was 100%. Please send me a firmware update.
Regards,
Eugeniy
Hi @BLUETTI_CARE !
Please update my power station.
AC180P2344004023990
ARM version v2089.02
DSP version v2088.02
BMS version v1039.01
Hello, I have the same issue.
SN: AC180P2344000658732
ARM v2089.02
DSP v2088.02
BMS v1039.01
Could you please sent the new firmware to my device ?
I have the same problem. When at 100% battery the station shut downs by itself after some time (ECO is off).
@BLUETTI_CARE Could you please also push this firmware to me?
AC180P2344004373471
ARM 2089.02
DSP 2088.02
BMS 1039.01
Hi! Same issue here. Could you please push this fw to my device as well?
AC180P2335001646247
ARM 2089.02
DSP 2088.02
BMS 1039.01
Thanks!